Peptide Storage Case
Volume pricing
- Spend £50.0010% off
- Spend £100.0015% off
- Spend £200.0020% off
- Spend £500.0035% off
Applied automatically at checkout — no code needed. One discount per order.
Description
A peptide storage case for 3 ml research vials
A rigid, 3D-printed hard case that holds research vials upright and protected between uses. The base is printed as a single moulded block with individual chamfered bores sized for 3 ml vials, so each vial sits in its own pocket rather than rolling loose, and a dark grey foam pad bonded into the lid presses down on the caps to stop any movement in transit.
Printed in PETG — a glycol-modified polyester from the same family as drinks bottles. It is chosen here for impact resistance rather than appearance: PETG absorbs a knock and flexes instead of shattering, which is the failure mode that matters for a case carrying glass. It also resists alcohols, so the shell can be wiped down with isopropyl without crazing or clouding, and it holds up to dilute acids and bases. Strong alkalis and chlorinated solvents should be kept off it.
The shell carries a fine printed layer texture, a stepped lid rim, reinforced corners, stainless hinge pins at the back and a positive flip clasp at the front that stays shut when the case is dropped or carried in a bag. Stable between freezer and room temperature; it is not autoclavable.
Available as a 6-slot and a 20-slot, both in white with a turquoise clasp.
Fits 3 ml vials only — the bores are sized specifically for 3 ml vials and will not hold 5 ml, 10 ml or 30 ml vials. Because each case is 3D-printed, very small differences in finish or fit between individual units are normal and are not a fault.
Specifications
Related products
Ordering, delivery and payment
Order before 4pm on a working day and it goes out the same day. After 4pm, or at a weekend or bank holiday, it goes out on the next working day.
Royal Mail Tracked 24 across the UK. A tracking number is attached to your order as soon as the parcel leaves us, and appears on your account dashboard. Free UK tracked delivery on orders over £35.
Our main payment method, powered by Fena and built on FCA-regulated open banking. You choose your bank, approve the payment in your own banking app, and come straight back — confirmed instantly. No card number is entered and we never see or store your banking details.
A standard transfer is also available at checkout if you prefer. Orders paid this way are dispatched once the funds arrive.
Discounts apply automatically at checkout — 15% over £100, 20% over £200, 35% over £500. One discount per order, no code needed.
More detail in the FAQ.
Delivery, returns and damaged orders
Please inspect your order as soon as it arrives and tell us promptly about any damage, defect or shortage. Because these are sealed research materials, we cannot generally accept a return or refund once the seal on a vial has been broken. If an item arrives faulty, damaged in transit, or not as described, we will replace it or refund it. Email info@elitebiolabs.co.uk before sending anything back. This does not affect your statutory rights.
Full wording is in section 9 of our Terms · more detail in the FAQ.